On Off Valves

Easy-Access Threaded On/Off Valves

36 produits

Extend your reach in hard-to-access areas—turn these valves on and off using a square ratchet to grasp the hole at the end of the handle. Use with water, oil, air, and inert gas.

Flow-Indicating

14 produits

Threaded On/Off Valves An easy-to-read flow-indicating handle shows the percentage the valve is open. These valves are for use with water, oil, inert gas, and steam.

Snap-Shut Threaded On/Off Valves

9 produits

For applications that require intermittent operation, such as spraying and washing, push or pull the lever on these valves to start flow. They spring closed when the lever is released.

Extended-Stem

16 produits

Threaded On/Off Valves For installation through thick insulation, these valves have an extra-long stem.

Compact Threaded On/Off Valves

108 produits

Install these valves in tight spots, such as where pipelines are crowded together. They’re less than half as long as standard threaded valves and one-third shorter in height. Use with water, oil, air, and inert gas.

Miniature Threaded On/Off Valves

1 produits

With 10-32 UNF threads and a body less than 3/4” long, these valves are often used to control flow in miniature pipelines. They’re rated for use with water, oil, air, and inert gas.

Fast-Acting Threaded On/Off Valves

21 produits

Push a button or flip a toggle switch to start or stop flow.

Panel-Mount Threaded On/Off Valves

57 produits

Access the handle of these valves while protecting your line behind an instrument panel. They have threads and a hex nut below the handle for panel mounting.

Fast-Acting Panel-Mount

19 produits

Threaded On/Off Valves Start or stop flow with the flip of a toggle switch or the push of a button. They fit through a cutout, so the body of the valve stays safe inside your instrumentation panel.

High-Pressure

98 produits

Threaded On/Off Valves Rated for at least three times the pressure of standard threaded valves, these valves are used to start and stop the flow of compressed gas, pressurized water, or steam.

Easy-to-Install

13 produits

Threaded On/Off Valves For fast installation and removal from pipelines, these valves have a union fitting that disassembles into multiple pieces. They’re for use with water, oil, air, inert gas, and steam.

Swivel Threaded On/Off Valves

4 produits

Make connections from any direction—the body of these valves swivels 360° for easy installation. Often used in testing and sampling applications, they quickly open and close with a toggle or button.

Slide-In Threaded On/Off Valves

4 produits

Control flow in passageways of manifolds and valve mounting blocks without external pipes. Also known as cartridge valves, they slide into unthreaded holes and secure in place with the included set screw.

Plastic Threaded On/Off Valves

262 produits

with Garden Hose Threads Control flow through any garden hose—the threads on these valves are universally compatible with garden hose connections. Made of PVC, they’re a lightweight and corrosion resistant alternative to metal valves.

Compact Plastic

21 produits

Threaded On/Off Valves Fit these short and slim valves in control boxes, panels, and other tight spots. Made of plastic, they won’t pit or corrode on the inside like metal valves, and they’re lighter in weight for easy handling.

Compact Flanged On/Off Valves

17 produits

Also known as wafer ball valves, these combine the slim body of a butterfly valve with the high flow rates of a flanged ball valve. Bolt these valves to ANSI flanges—they meet ASME standards for dimensions, material, and pressure-temperature rating. Use with water, oil, air, steam and inert gas such as helium.

Single-Flange On/Off Valves

14 produits

Bolt these valves to pipe and pump flanges to start and stop flow before pump maintenance without draining your system.

Plastic Flanged On/Off Valves

10 produits

Made of plastic, these valves are a lightweight alternative to metal valves. Union fittings connect the flanges to the valve—with a quick turn, you can install and remove the valve without having to bolt and unbolt the flange each time.

On/Off Valves with Yor-Lok Fittings

28 produits

For extra gripping power and a strong seal, the Yor-Lok fittings on these valves have two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings. These valves are for use with water, oil, air, and inert gas.

Fast-Acting Panel-Mount On/Off

6 produits

Valves with Yor-Lok Fittings Flip the toggle to quickly turn these valves on and off. All have threads and a hex nut below the handle for installation in instrument panels. For extra gripping power and a strong seal, they have Yor-Lok fittings with two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings. These valves are for use with water, oil, air, and inert gas.

High-Pressure On/Off

8 produits

Valves with Yor-Lok Fittings Built to withstand pressures up to 4,500 psi, these valves are ideal for high-pressure lines. For extra gripping power and a strong seal, they have Yor-Lok fittings with two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings

On/Off Valves with Barbed Fittings

42 produits

These valves have barbs that grip onto tubing, providing a secure hold. Because they’re made of metal, they are more durable than plastic valves and withstand higher temperatures.

Swivel On/Off Valves

6 produits

with Barbed Fittings For easy installation from any direction, the body on these valves swivels 360°. They have barbs to securely grip tubing.

Cleaned and Bagged

11 produits

Easy-Maintenance Socket-Connect On/Off Valves Often used for oxygen service and other high-purity applications, these valves come cleaned and bagged. Insert unthreaded pipe into the socket ends and weld to create a permanent, leak-tight connection. For easy maintenance, they have a three-piece bolted body that disassembles inline so you can access internal components without removing welded connections.

Socket-Connect On/Off Valves

4 produits

Insert unthreaded pipe into the socket ends and bond with primer and cement to create a permanent, leak-tight connection. The socket ends of these valves are lined with PVC for bonding to PVC pipe.

Easy-to-Install On/Off Valves

6 produits

with Solder-Connect Fittings Install these valves in lines that require frequent maintenance or cleaning. They give you a leak-tight, permanent solder connection to your tubing with the ease of a union fitting to install them without disrupting your line.

Solder-Connect On/Off Valves

3 produits

with Gauge Port and Strainer Monitor and maintain flow quality from a single valve. Thanks to their solder-connect union fitting, these valves are especially useful in lines that require frequent maintenance and cleaning.

Compact On/Off Valves

15 produits

with Compression Fittings A short body length and low profile make these valves ideal for installation in tight spaces, such as between pipelines. They have a compression sleeve that bites into tubing as you tighten the nut.

Panel-Mount On/Off Valves

46 produits

with Compression Fittings Easily access the handle of these valves while protecting your line behind an instrument panel. A compression sleeve bites into tubing as you tighten the nut, forming a strong seal.

Easy-Maintenance On/Off

10 produits

Valves with Compression Fittings With a three-piece bolted body that disassembles for access to internal components, you can clean and repair these valves without removing them from your line. A compression sleeve bites into tubing as you tighten the nut, forming a strong seal.

Plastic On/Off Valves

51 produits

with Compression Fittings Use these plastic valves for a lightweight and economical alternative to metal. They have a compression sleeve that bites into tubing as you tighten the nut, forming a strong seal. Use with water, air, and inert gas.

Butt-Weld On/Off Valves

5 produits

Weld these valves to unthreaded metal pipe for a permanent, flush connection that permits smooth flow through a line. Use with water, oil, inert gas, and steam.

Noncontact On/Off Valves

1 produits

Also known as pinch valves, these valves stop flow by squeezing tubing from the outside. Since they don’t directly contact your fluid, they’re good for applications where you need to prevent contamination.

On/Off Valves with Luer Lock Fittings

19 produits

With just a half turn or a light push, these valves connect to luer lock fittings on your line.

Miniature Threaded On/Off

1 produits

Valves for Chemicals To withstand aggressive and corrosive solutions in miniature chemical-processing pipelines, these tiny valves have a chemical-resistant fluoroelastomer seal and a corrosion-resistant 303 stainless steel body.

Ultra-Chemical-Resistant

6 produits

Threaded On/Off Valves The most chemical-resistant threaded valves we offer, these have a PTFE seal and an alloy body that can withstand extremely aggressive and corrosive chemicals, such as methyl ethyl ketone and toluene.

Threaded On/Off Valves for Chemicals

18 produits

To withstand aggressive and corrosive solutions in chemical-processing applications, these valves have a fluoroelastomer seal and a PVC or CPVC body.

Threaded On/Off Valves with

5 produits

Garden Hose Outlet for Chemicals Control the flow of chemical solutions from any garden hose. With a fluoroelastomer seal and polypropylene body, these valves withstand strong chemicals, such as chlorinated water and phosphoric acid.

Threaded Isolation On/Off

1 produits

Valves for Chemicals Attach gauges or sensors to these valves so you can remove them for maintenance and calibration without depressurizing your line. They are also known as block and bleed valves.

Easy-Clean Threaded

4 produits

On/Off Valves for Chemicals There’s no need to unbolt these valves for cleaning—remove the valve handle and slide the valve apart for inline access to internal components. Also known as elliptical valves, they have a fluoroelastomer seal and a polypropylene body to withstand aggressive and corrosive solutions in chemical-processing applications.

Flanged On/Off Valves for Chemicals

15 produits

Bolt these valves to ANSI flanges—they meet ASME dimensional standards. They have a plastic body and a seal that withstand aggressive and corrosive solutions in chemical-processing applications.

On/Off Valves with Luer

12 produits

Lock Fittings for Chemicals Made of PVDF to withstand corrosive solutions, these valves are ideal for use in chemical processing. Their luer lock fittings are quick to connect and disconnect for convenience.

On/Off Valves with Yor-Lok

2 produits

Fittings for Chemicals For extra gripping power and a strong seal, the Yor-Lok fittings on these valves have two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings. These valves have a PTFE seal and a corrosion-resistant Monel ball and body that can stand up to aggressive and corrosive chemicals such as acetone.

Threaded On/Off Valves with Garden

3 produits

Hose Outlet for Drinking Water Certified to meet NSF/ANSI 61, these valves control the flow of drinking water. With universally compatible threads, they’ll connect to any garden hose or garden hose fittings.

Compact Threaded On/Off

47 produits

Valves for Drinking Water A short body length and low profile make these valves ideal for installation in tight spaces, such as behind panels. They meet NSF/ANSI 61 standards for safe use in drinking water systems.

Easy-to-Install Threaded On/Off

5 produits

Valves for Drinking Water A threaded union on these valves makes them easy to install and remove without disrupting your line. They meet NSF/ANSI 61 for safe use in drinking water systems.

Plastic Threaded On/Off

31 produits

Valves for Drinking Water Made of plastic, these valves won’t pit or corrode on the inside like metal valves, and they’re lighter in weight. They meet NSF/ANSI 61 for use with drinking water.

Easy-to-Install Plastic Threaded

40 produits

On/Off Valves for Drinking Water Disassemble the union fittings on these valves for fast installation and removal from your pipeline. All meet NSF/ANSI 61 for use with drinking water.

Panel-Mount Threaded On/Off

12 produits

Valves for Drinking Water Protect your drinking water line behind an instrument panel while keeping the handle handy. These valves have a nut that threads onto the stem to mount the handle onto the panel.

Easy-to-Install Socket-Connect

117 produits

On/Off Valves for Drinking Water Ideal for lines that need frequent maintenance, these valves have union fittings that disassemble quickly for removal. They meet NSF/ANSI 61 for use with drinking water.

Plastic On/Off Valves with

35 produits

Push-to-Connect Fittings for Drinking Water Insert your tubing into the fittings of these valves with just a push—the internal rings will grip it tight. Made of plastic, these valves are a lightweight alternative to metal valves. All meet NSF/ANSI 61 for safe use with drinking water.

On/Off Valves with Press-Connect

52 produits

Fittings for Drinking Water For a permanent, leak-tight connection that doesn’t require heat or soldering, these valves have press-connect fittings that crimp to copper tubing. Install them with a press-connect crimping tool. These valves meet NSF/ANSI 61 for use in drinking water systems.

Plastic On/Off Valves with Barbed

15 produits

Fittings for Drinking Water Barbs grip onto tubing to give these valves a secure hold. These valves meet NSF/ANSI 61, so they’re safe to use with drinking water.

Easy-Maintenance On/Off Valves

17 produits

with Solder-Connect Fittings for Drinking Water Service these valves without cutting soldered connections. The three-piece bolted body disassembles to access internal components, so you can clean and repair these valves without removing them from your line. They meet NSF/ANSI 61 for safe use in drinking water systems.

Flanged On/Off Valves

46 produits

for Drinking Water Bolt these valves onto ANSI flanges. They meet NSF/ANSI standard 61, so they’re safe for use in drinking water systems.

Threaded On/Off Valves for Fuel

70 produits

Protect personnel and equipment in the presence of diesel fuel, fuel oil, gasoline, and kerosene. Fire-tested to meet American Petroleum Institute (API) 607, Edition 4, these valves are designed to securely isolate fluid and prevent the spread of fire.

Compact Threaded

13 produits

On/Off Valves for Fuel A low-profile handle allows these valves to fit in low-clearance pipelines for diesel fuel, fuel oil, and kerosene.

Flanged On/Off Valves for Fuel

14 produits

Keep your worksite safe when working with diesel fuel, fuel oil, gasoline, and kerosene. Fire-tested to meet American Petroleum Institute (API) 607, these valves are designed to securely isolate fluid and prevent the spread of fire.

On/Off Valves with 37°

5 produits

Flared Tube Fittings for Fuel These valves have 37° flared tube fittings that form a tight seal on metal tubing lines to transfer diesel fuel, fuel oil, and gasoline.

On/Off Valves with Push-to-Connect

279 produits

Fittings for Food and Beverage Push tubing into the fittings on these valves and an internal gripping ring and O-ring hold it tight—no heat, solder, or flux required. They meet either NSF/ANSI standards or are FDA compliant for use with food.

On/Off Valves with Sanitary

39 produits

Quick-Clamp Fittings for Food and Beverage To maintain sanitary standards in food, beverage, and dairy systems that require frequent cleaning, these valves are made of FDA compliant materials. Polished to a 32 Ra finish, they have smooth internal surfaces that prevent product buildup and inhibit bacteria growth. All have sanitary quick-clamp fittings for easy disassembly.

Sanitary On/Off Valves

8 produits

for Food and Beverage 3-A certified as meeting sanitary design standards, these valves control the flow of liquids in food, dairy, pharmaceutical, and cosmetic plants.

On/Off Valves with Barbed

52 produits

Fittings for Food and Beverage To prevent leaks, these valves have barbed fittings that grip onto tubing to create a strong hold. They meet NSF/ANSI standards or are FDA compliant for use with food.

On/Off Valves with Butt-Weld

6 produits

Fittings for Food and Beverage Weld these valves to unthreaded metal pipe for a permanent, flush connection that permits smooth flow through a line. They have polished internal surfaces for easy cleaning in food and beverage systems.

On/Off Valves with Compression

12 produits

Fittings for Food and Beverage Control flow in lines where preventing leaks is critical, such as bottling lines. These valves have a compression sleeve that bites into tubing as you tighten the nut.

Compact Threaded On/Off Valves for

13 produits

Natural Gas, Propane, and Butane Install these low-profile valves in low-clearance pipelines for natural gas, propane, and butane.

Threaded On/Off Valves for

24 produits

Natural Gas and Propane Use these valves as a mainline shutoff in natural gas and propane pipelines.

On/Off Valves with 45° Flared

3 produits

Compression Fittings for Natural Gas, Propane, and Butane With 45° flared tube fittings, these valves form a tight seal on metal tubing lines for natural gas, propane, and butane.

Threaded On/Off Valves for Vacuum

8 produits

The bolted-body design provides strength for a tight seal in vacuum conditions up to 29.9” Hg. Use these valves in vacuum applications, such as coating, heat treating, leak testing, and analyzing gases.

Threaded On/Off Valves

409 produits

for Cryogenic Liquids Use these valves in cryogenic systems to control the flow of liquid nitrogen, carbon dioxide, and argon.

Socket-Connect On/Off

51 produits

Valves for Cryogenic Liquids Designed to withstand extremely cold liquid gases, these valves are ideal for liquid nitrogen cooling systems and liquified gas storage. Insert unthreaded pipe into the socket ends and weld to create a permanent, leak-tight connection.

Threaded On/Off

29 produits

Valves for Refrigerant Often used in HVAC or refrigeration systems, these valves are designed to control the flow of ammonia, nitrogen, and other harsh chemicals.

On/Off Valves with Solder-Connect

24 produits

Fittings for Refrigerant Install these valves in HVAC and refrigeration systems to control CO2. For a permanent, leak-tight connection, solder them to metal tubing.

Threaded Gradual On/Off Valves

101 produits

Also known as gate valves, these valves gradually open and close to prevent system damage from suddenly starting and stopping flow.

High-Pressure Threaded

21 produits

Gradual On/Off Valves Designed for use in refineries and other demanding environments, these valves have a durable body that can withstand nearly twice the pressure of other gradual on/off valves.

Plastic Threaded

8 produits

Gradual On/Off Valves

Easy-to-Install Threaded

64 produits

Gradual On/Off Valves A threaded union on these valves makes them easy to install and remove without disrupting your line.

FM-Approved Threaded

6 produits

Gradual On/Off Valves FM-approved for fire suppression and protection, these valves can isolate sections of the water supply in your facility.

Easy-Maintenance Threaded

56 produits

Gradual On/Off Valves Maintain and repair these valves while they’re still inline—you can disassemble the stem so there's no need to unthread the pipe connections. Also known as gate valves, they open and close gradually to prevent sudden starts and stops.

Flanged Gradual On/Off Valves

32 produits

Easier to install and remove than threaded or weld-on valves, these valves bolt to flanges. They open and close gradually, preventing system damage from sudden starts and stops in flow.

Tight-Seal Flanged

9 produits

Gradual On/Off Valves A rubber-coated gate, also known as a resilient wedge, compresses against the valve seat to give these valves a tight, leakproof seal. Since they bolt onto flanges, they’re easier to install and remove than threaded and weld-on valves.

FM-Approved Flanged

12 produits

Gradual On/Off Valves FM-approved, these valves are often used to isolate sections of your facility’s water supply for fire suppression and protection.

Flanged Gradual On/Off Valves for

3 produits

Thick Liquids and Dry Materials These valves have a sharp gate that slices through thick slurries, wastewater, dry bulk solids, and other materials that would clog other gradual on/off valves.

Vapor-Sealing Flanged

5 produits

Gradual On/Off Valves Control the flow of steam, hazardous gases, and other vapors without risking leaks. These valves have an accordion-like bellows around the stem that expands as they open and contracts as they close, forming an airtight seal.

High-Pressure Socket-Connect

13 produits

Gradual On/Off Valves With a forged steel body and bolted construction, these valves can withstand nearly 10 times the pressure of other socket-connect gradual valves.

Plastic Socket-Connect

17 produits

Gradual On/Off Valves

Socket-Connect

16 produits

Gradual On/Off Valves Insert unthreaded pipe into the socket ends and weld to create a permanent, leak-tight connection.

Flexible Joint Gradual On/Off Valves

2 produits

Flexible joints keep these valves tightly sealed during pressure changes or vibrations from heavy machinery.

Plastic Threaded Gradual On/Off

20 produits

Valves for Drinking Water A lightweight alternative to metal valves, these plastic valves have NPT connections for use with threaded pipe. All meet NSF/ANSI 61 for use in drinking water systems.

Plastic Socket-Connect Gradual

14 produits

On/Off Valves for Drinking Water Bond these valves to plastic pipe with PVC primer and cement to create a permanent, leak-tight connection in drinking water lines. Also known as gate valves, they open and close gradually to prevent damage to your system from sudden changes in flow.

Plastic Flanged Gradual On/Off

10 produits

Valves for Drinking Water Easier to install and remove for maintenance than threaded and weld-on valves, these valves bolt and unbolt to flanges. They meet NSF/ANSI 61 for safe use in drinking water systems.

Gradual On/Off Valves

12 produits

with Press-Connect Fittings for Drinking Water For a leak-tight connection in drinking water lines without heat or soldering, crimp the fittings on these valves to metal tubing with a press-connect crimping tool. They open and close gradually with multiple turns of the handle wheel to prevent jolts from sudden stops and starts.

Gradual On/Off Valves with

46 produits

Quick-Clamp Fittings for High Vacuum Also known as vacuum isolation valves, these block flow so you can install and remove gauges from your system. They can also be used to add or vent gases in high-vacuum systems.

Socket-Connect Gradual

12 produits

On/Off Valves for Chemicals These valves have socket-weld connections for bonding to unthreaded male plastic pipe.

Threaded Gradual On/Off

44 produits

Valves for Chemicals For use with threaded pipe, these valves have NPT connections.

Premium Solenoid On/Off Valves

83 produits

These top-of-the-line valves are comparable to Asco Red Hat 8210G Series and Parker Gold Ring 23C Series.

High-Pressure Compact

79 produits

Solenoid On/Off Valves Control flow in high-pressure lines in tight spots—these valves have the highest pressure ratings of our compact valves.

Premium Compact

25 produits

Solenoid On/Off Valves Comparable to Asco Red Hat 8210G Series and Parker Gold Ring 23C Series, these valves meet the highest quality standards.

Compact Solenoid On/Off Valves

59 produits

with Push-to-Connect Fittings Insert tubing into the fittings on these valves—no heat, solder, or flux required.

Miniature Solenoid On/Off Valves

6 produits

Less than half the size of our other compact valves, these have small pipe connections for miniature lines.

Hazardous Location

25 produits

Solenoid On/Off Valves These valves are rated for use in hazardous locations with flammable gas and combustible dust.

Anti-Water-Hammer

11 produits

Solenoid On/Off Valves Avoid pressure surges and system shocks that can damage piping by installing these valves that open and close slowly.

Compact Solenoid On/Off

31 produits

Valves for Coolant Reduce your pipeline footprint with these low-profile valves that are about half the size of standard valves for coolant.

High-Use Solenoid On/Off

4 produits

Valves for Detergent Sturdy internal components resist wear for a long service life in applications with frequent cycling.

Solenoid On/Off Valves for Steam

77 produits

Designed to withstand the high temperatures and pressures in steam service applications.

Solenoid On/Off Valves

297 produits

for Cryogenic Liquids Built to withstand the extreme cold of liquid nitrogen and liquid oxygen, these valves are cleaned and bagged for high-purity applications.

Food Industry Solenoid On/Off Valves

24 produits

These valves have threaded NPT connections.

Food Industry Solenoid On/Off

6 produits

Valves with Push-to-Connect Fittings Insert tubing into the fittings on these valves—no heat, solder, or flux required.

Solenoid On/Off Valves for Chemicals

6 produits

With a plastic body and a fluoroelastomer seal, these valves can stand up to aggressive and corrosive solutions in chemical-processing applications.

Noncontact Solenoid On/Off Valves

6 produits

For applications sensitive to contamination, these valves stop flow without contacting the process media by pressing down on the outside of tubing.

Solenoid On/Off Valves for Natural

16 produits

Gas, Propane, and Butane Install these valves in gas pipelines to automatically control the flow of natural gas, propane, and butane to equipment.

Solenoid On/Off Valves with

25 produits

Exhaust Port for Natural Gas, Propane, and Butane Often used to control single-acting, spring-return air cylinders, these valves have a third threaded port to exhaust media.

Solenoid On/Off Valves for Fuel Oil

2 produits

Supply fuel oil to boilers, furnaces, and other equipment.

Easy-Maintenance High-Flow

18 produits

Air-Driven On/Off Valves The three-piece bolted body comes apart for access to internal components without unthreading pipe connections and removing the valve from your line.

High-Flow Air-Driven On/Off Valves

84 produits

For use in general purpose applications with water, oil, and inert gas.

Heavy-Use High-Flow

9 produits

Air-Driven On/Off Valves Limit wear and damage in high-cycling applications—these valves have additional seals that prevent leakage to reduce maintenance time.

Versa-Mount Air-Driven On/Off Valves

42 produits

A compact, lightweight actuator and an angular body allow you to install these valves in any mounting orientation.

Compact Versa-Mount

4 produits

Air-Driven On/Off Valves About half the height of our other versa-mount valves, these fit in tight spots.

Severe-Duty Air-Driven On/Off Valves

9 produits

Also known as diaphragm valves, these have a diaphragm that can handle dirty liquid, slurries, and abrasive media without damage.

Compact Severe-Duty

6 produits

Air-Driven On/Off Valves Less than half the height of standard severe-duty valves, these fit in small spaces and low-clearance pipelines.

Flanged Air-Driven On/Off Valves

8 produits

Also known as butterfly valves.

Versa-Mount Air-Driven

7 produits

On/Off Valves for Chemicals Also known as piston valves, these have a compact, lightweight actuator that allows them to be installed in any mounting orientation. They’re often used in water-treatment applications.

High-Flow Air-Driven On/Off

6 produits

Valves for Chemicals Also known as actuated ball valves, these provide higher flow rates than other air-driven valves.

Severe-Duty Air-Driven

3 produits

On/Off Valves for Chemicals Also known as diaphragm valves, these have a diaphragm that can handle dirty liquid, slurries, and abrasive media without damage.

Flanged Air-Driven On/Off

4 produits

Valves for Chemicals With a ball-valve design, these valves can handle three times the flow of butterfly valves.

Air-Driven On/Off Valves

10 produits

for Food and Beverage For food and beverage applications that require frequent cleaning, these valves have quick-clamp connections, polished internal surfaces, and a three-piece bolted body for easy disassembly.

Sanitary Air-Driven On/Off Valves

7 produits

Use air pressure to automatically control the flow of liquids in sanitary environments, such as food and beverage processing plants.

Air-Driven On/Off Valves for Fuel

8 produits

Use these valves to safely transfer fuel and oil.

Easy-Maintenance

141 produits

Motor-Driven On/Off Valves Maintain and repair these valves without unthreading pipe connections. They have a three-piece bolted body that disassembles inline for access to internal components.

Compact Motor-Driven On/Off Valves

3 produits

With a slimmer motor than other motor-driven valves, these fit in tight spots.

Easy-to-Install Plastic

32 produits

Motor-Driven On/Off Valves Separate the union fittings on each end of these valves for fast installation and removal from pipelines.

Flanged Motor-Driven On/Off Valves

8 produits

Also known as butterfly valves.

High-Flow Flanged

8 produits

Motor-Driven On/Off Valves Their ball valve design allows these valves to handle three times the flow of butterfly valves.

Motor-Driven On/Off Valves with

6 produits

Socket-Connect Fittings for Drinking Water Insert unthreaded pipe into the socket ends and bond with PVC primer and cement to create a permanent, leak-tight connection.

Flanged Motor-Driven

4 produits

On/Off Valves for Chemicals For three times the flow of butterfly valves, these have a ball valve design.

Motor-Driven On/Off

14 produits

Valves for Chemicals All valves have threaded NPT connections.

Motor-Driven On/Off Valves

25 produits

for Food and Beverage For food and beverage systems that require frequent cleaning, these valves have polished internal surfaces and sanitary quick-clamp connections for easy disassembly.

Motor-Driven On/Off Valves for Fuel

8 produits

Use these valves to safely transfer fuel and oil.

Batch-Dispensing On/Off Valves

3 produits

Accurately and consistently dispense a specific amount of liquid—these actuated valves have a screen and buttons for programming batch size and calibration.

Safety-Lockout Air On/Off Valves

22 produits

A padlock locks the handle of these valves in the shut-off position so you can disconnect air tools safely.

Quiet Safety-Lockout

6 produits

Air On/Off Valves These valves have a muffler to reduce exhaust noise. A padlock locks the handle in the shut-off position so you can disconnect air tools safely.

Air On/Off Valves

3 produits

Control flow in two directions from a single source—these valves have two balls for independent control and shut-off of each outlet.

Sliding-Sleeve Air On/Off Valves

14 produits

Slide the knurled sleeve in one direction to stop flow, and slide it back to start flow again.

Timer-Operated Air On/Off Valves

1 produits

Install these valves on your air tank outlet—at the end of the day, they automatically close to save energy.

Electrically Operated Air On/Off Valves

2 produits

Also known as solenoid valves, these valves are operated by an electrical signal to turn airflow on or off.

Robot-Arm-Mounted Electrically

2 produits

Operated Air On/Off Valves Control the flow of air to robot tools from your robot's program. Often used with air-powered vacuum lifters, these electrically controlled valves open to supply air to the lifter, generating suction to pick up a part.

Air-Operated Air On/Off Valves

8 produits

Also known as blocking valves, these valves allow airflow while an air signal is applied to the air pilot. When the signal stops, the valve closes, trapping air in the system.

Foot-Operated Air On/Off Valves

4 produits

Turn airflow on and off with your foot to keep your hands free to perform other tasks.

High Airflow Shut-Off On/Off Valves

5 produits

Also known as air fuses, these valves close automatically to turn airflow off when air volume exceeds the shut-off flow rate.

Air Signal On/Off Valves

3 produits

When system pressure reaches the maximum, these valves open and send an air signal to turn on a downstream device such as a discharge valve or throttle. They close and send a signal to turn the device off when pressure drops.

On/Off Inline Hydraulic Valves

23 produits

Start and stop flow with a quarter turn of the handle. Also known as ball valves.

Lockable On/Off Inline

15 produits

Hydraulic Valves Lock the handle using a padlock.

Solenoid-Operated On/Off

8 produits

Screw-In Hydraulic Valves Control flow with an electrical signal.

Toggle-Operated On/Off

2 produits

Screw-In Hydraulic Valves Push or pull the toggle handle to control flow.

Quarter-Turn Shut-Off

6 produits

Valves for Plumbing Fixtures Often used in tight spaces, these valves shut off water with a quarter turn of the handle.

Shut-Off Valves for Plumbing Fixtures

12 produits

Also known as water supply stops, these valves shut off water to faucets, toilets, and fountains.

Color-Coded Quarter-Turn Shut-Off

5 produits

Valves for Hot and Cold Water Quickly identify hot and cold water lines with these red or blue valves.

Tamper-Resistant Shut-Off

4 produits

Valves for Plumbing Fixtures These valves have a removable key handle to prevent unauthorized use.

Self-Closing Valves

1 produits

for Plumbing Fixtures Turn the handle to start the flow of water; release the handle and the valve shuts off.

Laboratory Valves

1 produits

On/Off Valves with

165 produits

Garden Hose Threads Start and stop the flow of water through your garden hose.

Wye-Shaped On/Off Valves

22 produits

with Garden Hose Threads Convert one faucet into two, four, or five outlets.

Swivel On/Off Valves with

3 produits

Garden Hose Threads Keep fluids flowing—these valves twist and turn to prevent your hose from kinking.

Aluminum Quick-Connect Pipe

19 produits

Fittings for Compressed Air Twist these fittings onto aluminum pipe for quick, sealed connections—no threading, soldering, or welding necessary. Use them to build a compressed air system in half the time it would take to build a copper or steel system.

Gas Sampling Valves for Syringes

1 produits

Convert an everyday syringe into a gas sampling syringe. These valves allow you to collect, transport, and store gas samples without worrying about evaporation or leaks.